Interior lighting · Installation, upgrades & repair

Interior lighting.
Made for the way you live.

A brighter kitchen. A welcoming entry. Lights that respond the way they should. Live Wire Electric helps you install new fixtures, plan lighting upgrades and resolve fixture or control problems. Bring your room ideas or describe the concern—we will help define the next step.

Installation, upgrades or repair—tell us what your home needs.

Two Live Wire Electric technicians assembling a chandelier near a staircase
The details behind a new light.
Lynnwood basedKing & Snohomish CountiesRead customer reviews

One crew. The right next step.

What would make your rooms work better?

Put the right light in the right place.

Whether you have chosen a pendant or want a new lighting layout, we review the fixture, room and installation conditions together. Adding a new location and replacing a fixture at an existing connection involve different work.

  • Ceiling fixtures, pendants, chandeliers and new lighting locations.
  • Recessed and task-lighting plans coordinated with how the room is used.
  • Mounting support, wiring access and high-ceiling equipment considered early.
Request a Lighting Installation Estimate

Refresh the light, keep the room comfortable.

An LED upgrade or dimmer change should improve the way you use the space. We help compare light output, color appearance and control compatibility before a room-by-room refresh or larger installation.

  • Review lamps, retrofit equipment and full-fixture replacement options.
  • Match dimmers and drivers to the selected products.
  • Discuss lighting zones and useful control locations around your routine.
Discuss My Lighting Upgrade

Find out why the lighting is acting up.

A flickering fixture, unreliable switch or dimmer that behaves differently after a bulb change deserves the right diagnosis. We assess the relevant lighting and circuit, then explain the recommended repair before you authorize it.

  • Tell us which rooms and controls are affected.
  • Mention recent lamp, fixture or dimmer changes and symptoms already noticed.
  • Leave electrical covers closed and avoid recreating a fault for testing.
Book a Lighting Repair Visit

Our $69 dispatch fee applies to service calls, is waived for active members and is credited toward completed work. Confirm the visit type and scope when scheduling. Membership details · Service terms

Let's make a plan.

Let's bring your next bright idea home.

One fixture, a room refresh or lighting that needs attention. Tell us what you have in mind, and we will help plan the visit.

No crossed wires.

A clear plan before the room changes.

  1. Tell us what the room needs

    Share the fixture list, room photos and the locations you want to keep or change. For repairs, describe the behavior and any recent changes without opening electrical equipment.

  2. Review the installation or repair

    We assess the relevant connections, access and product requirements. You receive the proposed scope and pricing, including any control changes, new wiring or finish-work responsibilities.

  3. Complete the work and check operation

    We perform the approved electrical work and check the lights and controls together. We explain the settings and any remaining app setup, finish work or project coordination identified in the scope.

Before we arrive.

Bring your ideas. A few details help too.

You do not need to settle every product choice before contacting us. Confirm major fixture and access requirements before making a large purchase.

  • Candidate fixture models, dimensions, weight and installation instructions.
  • Room photos and a list of existing versus new lighting locations.
  • Ceiling height, stairs, attic access and nearby renovation plans.
  • Dimming preferences and current lamp or control models, if already known.

A quote that fits the work.

What shapes a lighting estimate?

  • The number and type of fixtures and whether locations change.
  • Existing wiring, mounting support, ceiling access and assembly needs.
  • Dimmer, switch, circuit or compatible LED-equipment changes.
  • Permits and any separate patching, painting or decorative restoration.
A technician on scaffolding in a tall entryway with a staircase
High ceilings make access part of the plan.

Your home. Our neighborhood.

A local crew.
A clear conversation.

Work with Live Wire Electric, based in Lynnwood and serving homeowners across King and Snohomish Counties. Tell us what you want to change, what is not working and what matters most to you.

We explain the proposed work and visit details so you can choose your next step with confidence.

A little help from Sparky.

Wondering what
your project could cost?

Explore the scope, see a planning range when the details support one, and understand what still needs an on-site look. No contact details required.

A clearer view of the full cost.

Plan the project.
Explore the payments.

Have a planning amount for interior lighting? Compare hypothetical payments, interest and total cost without entering contact details.

Read about financing with Wisetack
Open the payment calculator

Explore an example payment.

Example calculations only. This does not check credit, establish eligibility or reserve a financing offer.

Your written estimate or a hypothetical planning amount.

An assumption for this example, not a required deposit.

Choose an example from 0% to 35.9%.

Compare repayment periods, not available offers.

Enter your assumptions, then calculate an example. The calculator needs JavaScript; project and financing information remain available below.

Choose hypothetical APR and term assumptions to compare costs. These selections are not a list of financing options available to you. A down payment entered here is an assumption, not a required deposit.

Financing depends on lender approval. Wisetack publishes amounts of $500–$65,000, APRs of 0%–35.9%, and terms of 3–120 months for home services. Your amount, APR and term depend on the transaction, creditworthiness, merchant and lending partner; state rate limits may apply. Some merchants and lenders do not offer 0% APR or extended terms. Wisetack reports no origination charges, late fees or early-payoff penalties. Review the lender’s actual payment schedule and agreement before accepting financing. This worksheet adds no financing fees and makes no approval decision. Wisetack’s current FAQs (opens in a new tab)

Calculation and rounding details

Monthly payments are rounded to cents. The total uses the unrounded payment formula; the final payment is adjusted so the displayed payments add up. Actual lender calculations and payment dates may differ.

This models equal monthly periods at a fixed APR without added financing fees. Compare the lender’s actual schedule before making a decision. Your entries stay in this calculator; it does not save them or send them with a service request.

A little Sparky. A lot of local pride.

Your next project.
Our kind of work.

From a fix you've been putting off to the upgrade you've been planning, start with a conversation. Our Lynnwood crew helps homeowners across King and Snohomish Counties take the next step.

Find your neighborhood
Live Wire Electric branded service van with Sparky artwork and a technician at the wheel
A familiar spark around town.

A little clarity goes a long way.

Your questions.
Clear answers.

Have a question about your home? Call the crew at (206) 238-0265.

Can you install lights where there is no existing fixture?

Yes, subject to an installation assessment. We plan the wiring route, switching, mounting and available circuit capacity. Access above the ceiling and any openings in finished surfaces affect the scope, so placement is confirmed before installation.

Should I buy the fixtures before scheduling?

Bring candidate models first, especially for heavy chandeliers, tall entries or recessed lighting. We can review mounting, access and electrical requirements before a major purchase. Confirm who supplies fixtures, lamps and assembly work in the estimate.

Will new LEDs work with my current dimmer?

That depends on the actual lamps or LED drivers and the dimmer. A dimmable label alone does not establish compatibility with every control. We review the manufacturer information and may recommend a different product or control as part of the plan.

Do flickering lights mean the house needs rewiring?

Not automatically. Product compatibility, a fixture or control fault, or a wider electrical concern can produce different symptoms. Tell us where and when it happens. We assess the problem before recommending a repair or any larger wiring work.

Your next step starts here.

Let's bring your next bright idea home.

One fixture, a room refresh or lighting that needs attention. Tell us what you have in mind, and we will help plan the visit.

Our $69 dispatch fee applies to service calls, is waived for active members and is credited toward completed work. Confirm the visit type and scope when scheduling.

Chat with the crew